Open AccessResearch on the Control Mode of Homogeneous Charge Compression Ignition Combustion Working Process and Its Technical Prospect
Author(s) -
Sirui Chen,
Yichen Deng,
Zhong Ma,
Yujing Zhang
Publication year - 2021
Publication title -
journal of physics. conference series
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.21
H-Index - 85
eISSN - 1742-6596
pISSN - 1742-6588
DOI - 10.1088/1742-6596/2108/1/012086
Subject(s) - homogeneous charge compression ignition , ignition system , combustion , automotive engineering , thermal efficiency , engine knocking , octane rating , internal combustion engine , carbureted compression ignition model engine , ignition timing , environmental science , nuclear engineering , process engineering , materials science , compression ratio , engineering , combustion chamber , diesel cycle , chemistry , aerospace engineering , organic chemistry
The homogeneous charge compression ignition (HCCI) engine is considered an advanced technique, a form of internal combustion in which well-mixed fuel and oxidizer (typically air) are compressed to the point of auto-ignition. HCCI engines have higher thermal efficiency and lower emissions than Spark Ignition (SI) and Compression Ignition (CI) engines. The emissions of NOx can be neglected compared to the CI engine. In addition, a wide variety of fuels, combinations of fuels and alternative fuels can be used in this type of internal combustion engine. Moreover, when investigating the heat release rate of a HCCI engine for both single- and two-stage ignition fuels, the results show that for both fuel types, the cycle changes in the ignition and combustion phases increase with the delay of the combustion phase. Also, the cycle change of iso-octane (the single-stage ignition fuel) is higher than that of PRF80 (the two-stage ignition fuel). This paper will first introduce the control mode of the HCCI engine and then review its current status from the perspective of combustion, emissions, and consumption. After presenting the current status, the authors present suggestions about the prospect of further development with respect to the timing of ignition, the expansion of the engine operating range, and the choice of fuel mixture in this new mode of technology.