Open AccessIntensification of heat transfer in the inlet of the convective stage of the recuperative-burner unit
Author(s) -
Yu. L. Leukhin,
P D Alekseev
Publication year - 2021
Publication title -
journal of physics. conference series
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.21
H-Index - 85
eISSN - 1742-6596
pISSN - 1742-6588
DOI - 10.1088/1742-6596/2088/1/012024
Subject(s) - combustor , mechanics , heat transfer , convective heat transfer , convection , fluent , heat transfer coefficient , recuperator , thermal conduction , materials science , mechanical engineering , heat exchanger , computer simulation , chemistry , engineering , physics , composite material , organic chemistry , combustion
The study of aerodynamics and heat transfer in the recuperator convective stage of the recuperative-burner unit with the jet leakage of the flue gas flow onto the outer cylindrical surface is carried out. Numerical modeling of the problem was carried out in a three-dimensional formulation using the ANSYS Fluent software package. It was found that in the original design of the recuperative-burner unit, there is a significant unevenness of heat transfer along the length and perimeter of the working surface of the convective stage. In the initial section of the annular gap, a stagnant zone with the lowest heat transfer rate is observed. To eliminate the stagnant zone and to intensify heat transfer on the surface in this area, it is proposed to make the entrance to the perforated pipe in the form of an inner quarter of a torus; to install smooth protrusions on its surface; to locate an annular flow divider on the inner surface of the heat transfer wall, which separates the front part of the annular channel with formation of a set of vortex chambers. The research results are presented.