Open AccessThe effect of temperature, humidity and mechanical properties on crack formation on external thin plasters of ETICS
Author(s) -
Kseniia Volkova,
Mattias Põldaru,
Simo Ilomets,
Targo Kalamees,
Martin Talvik,
Dariusz Heim
Publication year - 2021
Publication title -
journal of physics. conference series
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.21
H-Index - 85
eISSN - 1742-6596
pISSN - 1742-6588
DOI - 10.1088/1742-6596/2069/1/012025
Subject(s) - composite material , materials science , shrinkage , thermal expansion , humidity , ultimate tensile strength , moisture , composite number , mineral wool , young's modulus , physics , thermodynamics
External Thermal Insulation Composite Systems (ETICS) are widely used in the northern hemisphere in retrofitted and new external walls. The outer layer of ETICS is usually a thin layer of plaster. The effects of temperature and humidity on the hygrothermal behaviour and mechanical properties of thin plasters have been quantified by conducting several experiments to determine the possibility of crack formation. Combinations of plasters using four types of binders are tested: mineral, polymer, silicate and silicone. Plasters are tested as four systems consisting of a base coat, a glass-fibre reinforcement mesh and a finishing coat. Sorption curves of the plaster systems are determined to gather data for numerical simulations. The coefficients of thermal and hygroscopic expansion are determined. The modulus of elasticity and tensile strength of four different plasters are measured to allow the calculation of crack formation in ETICS and suggest the distances between the deformation joints. The method demonstrated in this paper makes it possible to calculate the crack formation caused by the temperature and moisture shrinkage in the thin exterior plaster of ETICS.