Open AccessEffect of HTF flow direction, mass flow rate and fins on melting and solidification in a latent-heat-based thermal energy storage device
Author(s) -
A Akarsh,
Sumer Dirbude
Publication year - 2021
Publication title -
journal of physics. conference series
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.21
H-Index - 85
eISSN - 1742-6596
pISSN - 1742-6588
DOI - 10.1088/1742-6596/2054/1/012049
Subject(s) - phase change material , heat transfer , materials science , thermal energy storage , thermodynamics , mass flow rate , latent heat , fin , mechanics , mass transfer , volumetric flow rate , thermal , mass flow , composite material , physics
Latent-heat-based thermal energy systems (LHTES) have commonly been used as a potential energy storage mode over any other mode of thermal energy storage. Many heat transfer enhancement techniques have been proposed over the past years. These techniques reduce the melting and solidification times. Most of these techniques focus on the phase change material (PCM). However, the flow direction of the heat transfer fluid (HTF) can affect the heat transfer performance and pumping power requirement of the system. In this paper, the effect of HTF-flow direction, HTF mass flow rate and addition of the fins on the melting and solidification of the PCM in a shell-and-tube type of energy storage is numerically studied. Two-dimensional transient simulations are performed with ANSYS-Fluent where the phase-change process is modelled using the enthalpy-porosity formulation. The model is verified and validated by comparing with the available experimental data. A reasonable match is observed. The validated model, is used to study the effects of various parameters, such as, mass flow rate of the HTF, and triangular fin (at a fixed fin pitch) for both charging and discharging of the PCM. Finally, an influence of flow direction on the melting and solidification time has been studied. It is found that the contribution of HTF mass flow rate, the addition of the fin and HTF flow directions respectively is 1.3-3.01%, 16.97-17.62%, and 1.3-1.77% of overall heat transfer performance. A major contribution to the enhancement of overall heat transfer of the system is from the addition of fins.