Compositional, thermal and morphological characterization of recycled and modified elastomers for inclusion in commercial cement mixtures

Elastomers are natural or synthetic polymers used in the automotive, mining, mold, assembly and other industries, due to their mechanical resistance in a wide temperature range from 60 °C to 320 °C; however, the waste generated is not disposed of properly, especially in the manufacture of tires, which generates environmental problems like inadequate final disposal, generation of toxic gases and public health problems; Therefore, in order to recycle these wastes, the present investigation modified elastomers superficially in order to produce strong adhesion with inorganic compounds like cement, through oxidation and sulfonation processes. For this purpose, NaOH and KMnO 4 solutions were prepared at a concentration of 5% and then impregnated in saturated NaHSO 3 solution. Subsequently, the modified elastomer was morphologically characterized by scanning electron microscope, thermogravimetrically by differential scanning calorimeter; compositionally by infrared spectroscopy, Raman spectroscopy, X-ray fluorescence, energy dispersive X-ray analysis and hydrophobic tests using contact angle techniques, in order to establish morphological and chemical compatibility with inorganic compounds. Results evidenced inclusion of functional groups OH, C = O and SO 3 , the reduction of carbon present in weak bonds and the presence of inorganic components such as potassium, sodium, manganese and sulfur were evident. The scanning electron microscope shows an increase in the roughness and contact surface of the elastomer as a function of the inclusion of polar functional groups by surface chemical treatment. These characteristics are to generate greater inclusion and compatibility of elastomers of an organic nature in inorganic compounds like cement matrices.