Open AccessEffect of blade number and angle on the characteristics of the savonius type wind turbine
Author(s) -
Thanapong Chaichana,
Saowalak Thongdee
Publication year - 2019
Publication title -
journal of physics. conference series
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.21
H-Index - 85
eISSN - 1742-6596
pISSN - 1742-6588
DOI - 10.1088/1742-6596/1380/1/012110
Subject(s) - wind speed , wind power , turbine , vertical axis wind turbine , marine engineering , wind tunnel , wind direction , torque , tip speed ratio , turbine blade , wind gradient , blade (archaeology) , vertical axis , horizontal axis , environmental science , meteorology , structural engineering , engineering , physics , mechanics , mathematics , geometry , electrical engineering , aerospace engineering , thermodynamics
The savonius type vertical axis wind turbine can be operated in all wind directions, is low cut in speed and high in torque. Therefore, it is a potential source of energy in low wind areas. This research aimed to compare the performance of H-Savonius vertical axis wind turbine using blades numbers and blades angle. The turbine containing the blades numbers 4, 6, 8, 12, 16 and 18 with the blades angle being at -15°, -5°, 0°, 5° and 15°, respectively. Tests were undertaken at open type circuit wind tunnel. The results showed that the maximum power coefficient of the wind turbine at 16 blades and angle of 5° with an average of 0.26 which had 4.5 % increase in power compared to that of turbines the baseline. Finally, the cut in wind speed and the rev up time was 2.32 m/s and 25 s, respectively.