Open AccessAnalysis and implementation of a zero‐voltage switching pulse‐width modulation resonant converter
Author(s) -
Lin BorRen,
Hou BoRen
Publication year - 2014
Publication title -
iet power electronics
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.637
H-Index - 77
eISSN - 1755-4543
pISSN - 1755-4535
DOI - 10.1049/iet-pel.2013.0134
Subject(s) - pulse width modulation , zero (linguistics) , modulation (music) , pulse (music) , voltage , resonant inverter , resonant converter , physics , pulse frequency modulation , materials science , electrical engineering , converters , pulse amplitude modulation , acoustics , engineering , philosophy , linguistics , inverter
This study presents an interleaved pulse‐width modulation (PWM) converter to achieve the functions of zero‐voltage switching (ZVS) for all power switches and zero‐current switching (ZCS) for rectifier diodes at the secondary side. A three‐level hybrid DC converter is adopted to reduce the voltage stress of power switched at one‐half of the DC bus voltage and automatically balance the two input capacitor voltages. Therefore MOSFETs with 600 V voltage stress can be used at the second stage DC/DC converter after the three‐phase power factor correction circuit. The fixed frequency PWM is used in three‐level PWM resonant converter to regulate output voltage. Since the selected switching frequency is less than the series resonant frequency, MOSFETs can be turned on at ZVS and rectifier diodes can be turned off at ZCS. Thus, the switching losses of power switches are reduced and the reverse recovery losses of rectifier diodes are eliminated. Interleaved PWM scheme is adopted to share load current and further cancel current ripple at output capacitor side. Thus, output capacitance can be reduced. Finally, experiments are provided to verify the effectiveness of the proposed converter.