Open AccessDesign of a simple circularly polarised dual‐frequency reconfigurable microstrip patch antenna array for millimetre‐wave applications
Author(s) -
Famoriji Oluwole John,
Yang Shitan,
Li Yang,
Chen Wenhao,
Fadamiro Akinwale,
Zhang Zhongxiang,
Lin Fujiang
Publication year - 2019
Publication title -
iet microwaves, antennas and propagation
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.555
H-Index - 69
eISSN - 1751-8733
pISSN - 1751-8725
DOI - 10.1049/iet-map.2018.5973
Subject(s) - anechoic chamber , return loss , microstrip antenna , reconfigurable antenna , electronic engineering , antenna array , omnidirectional antenna , reconfigurability , engineering , computer science , acoustics , antenna (radio) , electrical engineering , coaxial antenna , physics , telecommunications
Reconfigurable antenna array has received a lot of attention in present‐day wireless communication systems. In this study, a simple design of a four‐element circularly polarised dual‐frequency reconfigurable microstrip patch antenna array for millimetre‐wave applications is proposed. The sequentially rotated series–parallel stub approach is employed in the feeding network design to provide symmetrical array elements positioning, and bringing about a good axial ratio of polarisation. Additionally, a matching branch per element is employed to generate spatial flexibility for element positioning and good impedance matching. Furthermore, due to high‐cost constraints of Ka‐band RF switches (such as PE42524 SPDT), switches are considered as transmission lines, and are placed within the fractal slots of each elements to reconfigure the frequency. The proposed array operates in two switching states: ON and OFF. Hence, it allows dual‐frequency reconfigurability of 27 and 35 GHz for the ON and OFF states, respectively. A full array prototype was then fabricated on a Rogers R5880 substrate and tested in an anechoic chamber. Simulation and measurement results corroborate quite well in general. Patch antenna array gives much better result characterised by reconfigurable behaviour with associated return loss, radiation pattern characteristics, and ˂ 3 dB axial ratio polarisation bandwidth than the single element. The proposed antenna array finds good applications in radar systems, satellite communications, and aerospace.