Open AccessBroadband planar antenna array for future 5G communication standards
Author(s) -
Ullah Hidayat,
Tahir Farooq A.
Publication year - 2019
Publication title -
iet microwaves, antennas and propagation
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.555
H-Index - 69
eISSN - 1751-8733
pISSN - 1751-8725
DOI - 10.1049/iet-map.2018.5603
Subject(s) - antenna measurement , dipole antenna , antenna (radio) , monopole antenna , spiral antenna , antenna array , coaxial antenna , microstrip antenna , antenna factor , radiation pattern , antenna efficiency , acoustics , engineering , electrical engineering , electronic engineering , physics
This study presents a 5G antenna array for millimetre‐wave communications. Overall size of the proposed antenna array is 40 × 15 mm 2 , and operates in a measured 23.76–42.15 GHz frequency range. A planar four‐way feed network has been designed, optimised and used to excite the antenna array elements. The single element of the array is spiral monopole surrounded by a boundary of vias with extended ground plane in an inverted U‐shaped manner. Hexagonal parasitic patches have been introduced at the backside to enhance impedance performance of the antenna element. Peak gain of the proposed antenna array is 11.5 dBi with radiation efficiency more than 83% in its entire operating band. The antenna gives a narrow beam‐width of as low as 10.1°. Single element and its 1 × 4 array have been fabricated using standard printed circuit board (PCB) process. Measured results show excellent compliance with the simulated design objectives. The antenna is low cost, low profile with simple design and is capable of being deployed in future 5G communication mobile networks.