Open AccessMiniaturised multiband two‐element coaxial continuous transverse stub antenna for satellite C‐band applications
Author(s) -
Jothilakshmi Vishnu Prakash P.,
Srinivasan Raju
Publication year - 2014
Publication title -
iet microwaves, antennas and propagation
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.555
H-Index - 69
eISSN - 1751-8733
pISSN - 1751-8725
DOI - 10.1049/iet-map.2013.0346
Subject(s) - stub (electronics) , omnidirectional antenna , return loss , coaxial antenna , radiation pattern , communications satellite , c band , antenna (radio) , coaxial , axial ratio , physics , electrical engineering , electronic engineering , engineering , optics , acoustics , satellite , microstrip antenna , aerospace engineering
The continuous transverse stub (CTS) technology incorporates the use of coaxial lines to produce effective microwave antenna structures that radiate an omnidirectional pattern with high efficiency and low return loss. In this paper a two‐element coaxial CTS antenna array is designed to operate in the C‐band with improved efficiency and gain. The proposed prototype of the C‐band antenna, with design operating frequencies –5.18, 6.536 and 7.42 GHz, finds numerous applications in C‐band satellite communications. During simulation, the efficiency at these frequencies had been observed to be 89.5, 87.6 and 95.9% and their corresponding gains were observed to be 7.54, 5.24 and 7.51 dB, respectively. The measured results of the C‐band antenna prototype for the above stated frequencies were observed to be 5.185, 6.845 and 7.313 GHz, respectively. This antenna can be used in INSAT/super extended C‐band, fixed‐satellite services which include space to earth, earth to space as well as mobile satellite services. The radiation of the designed structure is omnidirectional in the horizon plane, with minimum return loss. These simple and low‐cost coaxial CTS structures can be adopted in wireless communication systems.