Open AccessEffects of ZnO magnetron sputtering on surface charge and flashover voltage of oil‐impregnated paper
Author(s) -
Du Boxue,
Jiang Jinpeng,
Li Jin,
Zhu Wenbo
Publication year - 2019
Publication title -
high voltage
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.732
H-Index - 20
ISSN - 2397-7264
DOI - 10.1049/hve.2019.0070
Subject(s) - sputtering , materials science , sputter deposition , composite material , doping , scanning electron microscope , attenuated total reflection , cavity magnetron , analytical chemistry (journal) , optoelectronics , infrared , thin film , nanotechnology , optics , chemistry , physics , chromatography
With the aim of exploring an alternative method of nano‐doping in cellulose paper and improving flashover strength of oil‐impregnated paper, radio frequency (RF) magnetron sputtering method is introduced into the structural modification of insulating paper for converter transformers. In this experiment, insulating paper was treated with ZnO sputtering for 0, 7.5, 15 and 30 min, respectively. The surface morphology of dry paper was observed with a scanning electron microscope. The bonding mode of sputtered ZnO particles with cellulose matrix was investigated via attenuated total reflection infrared (ATR‐IR) spectroscopy and mechanical property of the sputtered samples were studied. Surface and volume conductivities of the oil‐impregnated sputtered paper were measured. Moreover, the charge dissipation characteristics of sputtered insulating paper was investigated by means of surface potential decay. In addition, trap distribution and carrier mobility of specimen were further obtained. Finally, the DC flashover strength were tested. The results showed that ZnO magnetron sputtering had a distinct influence on the structure of the insulating paper, resulting in the formation of hydrogen bond and chemical bond and an increase of the surface and volume conductivities. ZnO sputtering was found to decrease the initial potential and accelerate charge decay. Moreover, appropriate sputtering enhanced the surface flashover strength.