Premium
Numerical Analysis of Blood Flow in the Clearance Regions of a Continuous Flow Artificial Heart Pump
Author(s) -
Anderson Jay,
Wood Houston G.,
Allaire Paul E.,
Olsen Don B.
Publication year - 2000
Publication title -
artificial organs
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.684
H-Index - 76
eISSN - 1525-1594
pISSN - 0160-564X
DOI - 10.1046/j.1525-1594.2000.06580.x
Subject(s) - impeller , computational fluid dynamics , mechanics , volumetric flow rate , axial flow pump , flow (mathematics) , rotational speed , tip clearance , materials science , blood flow , mechanical engineering , engineering , physics , reciprocating pump , vortex , variable displacement pump , medicine , cardiology
The CFVAD3 is the third prototype of a continuous flow ventricular assist device being developed for implantation in humans. The pump consists of a fully shrouded 4‐blade impeller supported by magnetic bearings. On either side of this suspended rotating impeller is a small clearance region through which the blood flows. The spacing and geometry of these clearance regions are very important to the successful operation of this blood pump. Computational fluid dynamics (CFD) solutions for this flow were obtained using TascFlow, a software package available from AEA Technology, U.K. Flow in these clearance regions was studied parametrically by varying the size of the clearance, the blood flow rate into the pump, and the rotational speed of the pump. The numerical solutions yield the direction and magnitude of the flow and the dynamic pressure. Experimentally measured pump flow rates are compared to the numerical study. The results of the study provide guidance for improving pump efficiency. It is determined that current clearances can be significantly reduced to improve pump efficiency without negative impacts.