Premium
Roller Pump Induced Tubing Wear of Polyvinylchloride and Silicone Rubber Tubing: Phase Contrast and Scanning Electron Microscopic Studies
Author(s) -
Kim Won Gon,
Yoon Cheul Jong
Publication year - 1998
Publication title -
artificial organs
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.684
H-Index - 76
eISSN - 1525-1594
pISSN - 0160-564X
DOI - 10.1046/j.1525-1594.1998.06188.x
Subject(s) - silicone rubber , materials science , scanning electron microscope , composite material , silicone , natural rubber
Tubing wear and spallation have long been recognized as complications of roller pumps used in cardiopulmonary bypass (CPB) although the reported results of studies of polyvinylchloride (PVC) and silicone rubber tubing wear are still controversial. We conducted phase‐contrast microscope (PCM) and scanning electron microscope (SEM) studies of roller pump induced tubing wear. A closed CPB circuit was constructed, and both PVC and silicone rubber tubing (½ inch internal diameter [ID]) were tested under normal and tight occlusions of a dual roller pump at a typical CPB flow rate (4,500 ml/min) for 1, 2, 4, and 6 h in quintet. After each pump run, the tubing was removed. It was first examined with PCM, and suspicious portions were then analyzed in detail using SEM. In silicone rubber tubing of longer running time, the external diameter often decreased. Wear was invariably found on the luminal surfaces at the junction of the inner and outer walls of both the PVC and silicone rubber tubing with no significant differences between normal and tight occlusion. The grooves in the PVC tubing were narrow and continuous with occasional deep cracks in the tubing after more than 3 h of pump run. The grooves in the silicone rubber tubing were wide and often interrupted with occasional V‐shaped elevated areas. Craters of less than 50 μ occurred sporadically in both types of tubing. Neither PVC nor silicone rubber tubing offers advantages in terms of roller pump induced tubing wear and spallation.