Premium
The stress–life fatigue behaviour of aluminium alloy foams
Author(s) -
McCullough,
Fleck
Publication year - 2000
Publication title -
fatigue and fracture of engineering materials and structures
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.887
H-Index - 84
eISSN - 1460-2695
pISSN - 8756-758X
DOI - 10.1046/j.1460-2695.2000.00261.x
Subject(s) - materials science , compression (physics) , composite material , tension (geology) , stress (linguistics) , aluminium , deformation (meteorology) , aluminium alloy , alloy , philosophy , linguistics
The tension–tension and compression–compression nominal stress versus fatigue life responses of Alulight closed cell aluminium alloy foams have been measured for the compositions Al–1Mg–0.6Si and Al–1Mg–10Si (wt %), and for relative densities in the range 0.1–0.4. The fatigue strength of each foam increases with the relative density and with the mean applied stress, and is greater for the transverse orientation than for the longitudinal orientation. Under both tension–tension and compression–compression loading the dominant cyclic deformation mode appears to be material ratchetting; consequently, the fatigue life is highly sensitive to the magnitude of the applied stress. A micromechanical model is given to predict the dependence of life upon stress level and relative density. Panels containing a central hole were found to be notch insensitive for both tension–tension and compression–compression fatigue loading: the net‐section strength equals the unnotched strength.