Premium
MODAL APPROACH FOR PROCESSING ONE‐ AND THREE‐POINT BEND TEST DATA FOR DSIF–TIME DIAGRAM DETERMINATION. PART II—CALCULATIONS AND RESULTS
Author(s) -
Rokach IV
Publication year - 1998
Publication title -
fatigue and fracture of engineering materials and structures
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.887
H-Index - 84
eISSN - 1460-2695
pISSN - 8756-758X
DOI - 10.1046/j.1460-2695.1998.00088.x
Subject(s) - adina , superposition principle , finite element method , poisson distribution , modal , mathematical analysis , diagram , beam (structure) , structural engineering , mathematics , geometry , physics , materials science , optics , engineering , statistics , composite material
In Part I of this paper, using the modal superposition method, equations for dynamic SIF calculations are derived for an arbitrary linear model of an impact bend specimen. In this paper (Part II), modal parameters and other data which are necessary for the DSIF determination have been calculated for three types of specimen model: the Euler–Bernoulli beam model, and two‐ (2D) and three‐dimensional (3D) solid models. For the latter two cases, calculations were performed using the finite element program ADINA. Results for the 2D model of the specimen were fitted by polynomials for a wide range of specimen geometry parameters and Poisson’s ratio values. Considerable differences were observed between the beam model parameters and the 2D or 3D ones. The differences in results for the 2D and 3D models are small and mainly connected with non‐uniformity of the SIF distribution along the front of a through‐crack in the 3D solid. Results of processing one‐ and three‐point bend test data reported in the literature are presented. Numerical DSIF values are compared with the experimental ones.