Premium
NUMERICAL MODELLING OF A 3D RAIL RCF ‘SQUAT’‐TYPE CRACK UNDER OPERATING LOAD
Author(s) -
Bogdański S,
Olzak M,
Stupnicki J
Publication year - 1998
Publication title -
fatigue and fracture of engineering materials and structures
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.887
H-Index - 84
eISSN - 1460-2695
pISSN - 8756-758X
DOI - 10.1046/j.1460-2695.1998.00082.x
Subject(s) - squat , structural engineering , residual stress , materials science , crack closure , fracture mechanics , mechanics , engineering , composite material , physics , physiology , biology
The analysis is based on the 3D FE model of the rail Rolling‐Contact‐Fatigue (RCF) ‘squat’‐type crack, which tends to be common in tracks with high‐speed passengers and mixed traffic. The model incorporates the section of rail and a wheel of real geometry, in which the wheel is rolling over the running band of rail containing the ‘squat’‐type crack. The state of stress in the vicinity of the crack front is determined, and consequently the values and ranges of the stress intensity factors (SIFs) K I , K II and K III at the crack front are calculated for the cycle of rolling. To simulate loading conditions occurring in practice, residual, bending and thermal stresses acting in the presence of the tractive force were taken into account. The results indicate a significant role of face friction and tractive force in the loading mechanism at the ‘squat’. The longitudinal and lateral residual stresses may also influence the loading cycles, especially for the cases with reduced friction between the crack faces. Reduction of the face friction coefficient to values close to zero creates conditions for crack propagation driven by the shear mode mechanism. These results were obtained under a project sponsored by the ERRI D173 Committee, Utrecht, The Netherlands.