z-logo
Premium
Bed Load Transport in a River Meander
Author(s) -
Dietrich William E.,
Smith J. Dungan
Publication year - 1984
Publication title -
water resources research
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 1.863
H-Index - 217
eISSN - 1944-7973
pISSN - 0043-1397
DOI - 10.1029/wr020i010p01355
Subject(s) - bed load , point bar , meander (mathematics) , geology , sediment transport , shear stress , geotechnical engineering , stream power , hydrology (agriculture) , geomorphology , mechanics , sediment , geometry , fluvial , physics , mathematics , structural basin
Bed load transport in Muddy Creek, Wyoming, a sand‐bedded meandering river with equilibrium bottom topography, was found to consist of a zone of maximum sediment flux that shifted across the channel from near the inside bank in the upstream part of the bend toward the pool at the minimum radius of curvature. Significant net cross‐stream transport continued even through the crossings between the bends. The downstream bed load transport field for the bend which was studied in greatest detail was the same as that computed from bed form migration measurements and can be predicted from appropriate boundary shear stress data and the Yalin bed load equation. The zone of maximum bed load transport followed an outward‐shifting region of maximum boundary shear stress, although in the downstream end of the bend the sediment transport maximum tended to stay closer to the centerline than the boundary shear stress maximum due to particle size influences. Net cross‐stream transport varied with particle size and was effected by three major processes: topographically‐induced, near‐bed, cross‐stream flow; trough wise flow along obliquely oriented bed forms; and rolling or avalanching of particles on bed form lee faces plus rolling or mass sliding on a steep cross‐stream point bar side slope. Coarse particles were carried outward over the top of the point bar by a near‐bed cross‐stream flow that was induced by downstream shoaling. These particles then rolled and slid on the point bar side slope and eventually were carried toward the outer bank by troughwise transport along oblique dunes. In the upstream part of the bend, fine particles were carried inward by the channel curvature‐induced, near‐bed flow and by troughwise transport along lee faces of oblique bed forms. Fine particles and coarse particles crossed paths on top of the point bar, where weak troughwise flow moved just the finer particles toward the convex bank, and on the point bar face, where coarse particles rolled against the secondary circu‐ lation that was carrying the finer particles. Net cross‐stream bed load transport was toward the pool and was on average about 10% of the downstream bed load transport. The Engelund equation predicts reasonably well the general pattern of net cross‐stream transport through the meander, but it does not account for the substantial troughwise transport caused by oblique bedforms at several locations in the bend. Our observations suggest that equilibrium bed topography occurs when there is net outward transport into the outward shifting zone of maximum boundary shear stress.

This content is not available in your region!

Continue researching here.

Having issues? You can contact us here