Premium
Monitoring the Preonzo Rock Slope Instability Using Resonance Mode Analysis
Author(s) -
Häusler M.,
Michel C.,
Burjánek J.,
Fäh D.
Publication year - 2021
Publication title -
journal of geophysical research: earth surface
Language(s) - English
Resource type - Journals
eISSN - 2169-9011
pISSN - 2169-9003
DOI - 10.1029/2020jf005709
Subject(s) - instability , landslide , dissipation , geology , vibration , seismometer , damping ratio , displacement (psychology) , seismic noise , geotechnical engineering , structural engineering , seismology , acoustics , mechanics , physics , engineering , psychology , psychotherapist , thermodynamics
Abstract Reliable monitoring of unstable rock slopes is a prerequisite for successful mitigation of landslide hazards. However, most state‐of‐the art techniques rely on measuring the local surface displacement in the potential release area. In contrast, recording ambient vibration data allows for analyzing structural dynamic parameters of the unstable slope, such as resonance frequency, polarization of vibration, and energy dissipation. These parameters can be linked to properties of the instability, for example, to rock stiffness and fracture network orientation. We developed a processing method for continuous seismic data based on enhanced frequency domain decomposition modal analysis and applied it to the unstable rock slope Preonzo in Switzerland (∼140,000 m 3 ). Four years of ambient vibration data recorded at two permanent seismometers on the instability were analyzed, providing the resonance frequency, damping ratio, and normal mode shapes of the fundamental (∼3.5 Hz) and the first higher (∼4.2 Hz) vibrational mode. We found that modal analysis can be reliably used to monitor the dynamic response of an unstable rock slope. We observed annual changes of all parameters with a damping ratio varying between 6.0% and 9.7% for the fundamental mode. The dynamic parameters appear to be primarily driven by temperature and only secondarily by opening and closing of fractures. No large slope failure was registered during the observation period. However, the data provide a baseline model for ongoing slope monitoring to recognize structural changes before a future collapse. The setup proposed builds a complementary monitoring system to displacement‐based surveying.