Creep Burst Coincident With Faulting in Marble Observed in 4‐D Synchrotron X‐Ray Imaging Triaxial Compression Experiments

Faults in carbonate rocks show both seismic and aseismic deformation processes, leading to a wide range of slip velocities. We deformed two centimeter‐scale cores of Carrara marble at 25°C and imaged the nucleation and growth of faults using dynamic synchrotron X‐ray microtomography. The first sample experienced a constant confinement of 30 MPa and no pore fluid. The second sample experienced confinement in the range 35–23 MPa and water as a pore fluid at 10 MPa pore pressure. We increased the axial stress by steps until creep deformation occurred and imaged deformation in 4‐D. The samples deformed with a quasi‐constant or increasing strain rate when the differential stress was constant, a process called creep. However, for both samples, we also observed transient events that include the acceleration of creep, that is, creep bursts, phenomena similar to slow slip events that occur in continental active faults. During these transient creep events, strain rates increase and correlate in time with strain localization and the slow development of system‐spanning fault networks. In both samples, the acceleration of opening and shearing of microfractures accommodated creep bursts. High‐resolution time‐lapse X‐ray microtomography imaging and digital image correlation during triaxial deformation quantify creep in laboratory faults at subgrain spatial resolution. This work demonstrates that transient creep events, that is, creep bursts or slow slip events, correlate with the nucleation and slow growth of faults and not only with slip on preexisting faults.