Comparison between lidar and nephelometer measurements of aerosol hygroscopicity at the Southern Great Plains Atmospheric Radiation Measurement site

Aerosol hygroscopicity has a significant effect on radiative properties of aerosols. Here a lidar method, applicable to cloud‐capped, well‐mixed atmospheric boundary layers, is employed to determine the hygroscopic growth factor f (RH) under unperturbed, ambient atmospheric conditions. The data used for the analysis were collected under a wide range of atmospheric aerosol levels during both routine measurement periods and during the intensive operations period (IOP) in May 2003 at the Southern Great Plains (SGP) Climate Research Facility in Oklahoma, USA, as part of the Atmospheric Radiation Measurement (ARM) program. There is a good correlation (∼0.7) between a lidar‐derived growth factor (measured over the range 85% RH to 96% RH) with a nephelometer‐derived growth factor measured over the RH range 40% to 85%. For these RH ranges, the slope of the lidar‐derived growth curve is much steeper than that of the nephelometer‐derived growth curve, reflecting the rapid increase in particle size with increasing RH. The results are corroborated by aerosol model calculations of lidar backscatter and nephelometer equivalent f (RH) based on in situ aerosol size and composition measurements during the IOP. It is suggested that the lidar method can provide useful measurements of the dependence of aerosol optical properties on relative humidity and under conditions closer to saturation than can currently be achieved with humidified nephelometers.