Premium
Effect of sorbed oil on the dielectric properties of sand and clay
Author(s) -
Li Camille,
Tercier Paulette,
Knight Rosemary
Publication year - 2001
Publication title -
water resources research
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 1.863
H-Index - 217
eISSN - 1944-7973
pISSN - 0043-1397
DOI - 10.1029/2001wr900006
Subject(s) - dielectric , materials science , kaolinite , brine , sorption , mineralogy , conductivity , composite material , analytical chemistry (journal) , adsorption , thermodynamics , geology , chemistry , chromatography , metallurgy , optoelectronics , physics , organic chemistry
The dielectric response of geologic materials is related to the amount of water‐wetted solid surface present. This dependence raises the possibility that dielectric measurements may be used to detect changes in the state of the solid‐fluid interface such as those caused by the sorption of a chemical species. In this study, complex impedance data are collected for systems of clean and oil‐bearing sand and kaolinite vacuum‐ saturated with a 0.001 M NaCl brine in the frequency range 100 kHz to 10 MHz. The effective dielectric constant k and electrical conductivity σ of the samples are calculated from these measurements assuming quasi‐static conditions. We define the components in our system as brine, air, and a “wetted” solid phase. In this way, the contribution of the solid‐fluid interface to the bulk dielectric response is included in the last component. We use an inclusion‐based effective medium theory to extract the dielectric response of the wetted solid from the experimental data. The presence of sorbed oil is found to have little effect on the dielectric response of the wetted sand matrix, presumably because of the very low surface area (0.2 m 2 /g) of the solid‐fluid interface. In contrast, the kaolinite (5–12 m 2 /g) data indicate a decrease of the order of 50% in the dielectric constant of the wetted matrix phase as the amount of water‐wetted surface in the sample decreases. The results from this experimental study show that the presence of sorbed oil leads to a detectable change in the dielectric properties of high surface area geologic materials.