Premium
Dynamic Analysis of the Removal of Fatty Acid from a Pet Surface Using a Quartz Crystal Microbalance
Author(s) -
Kanasaki Yu,
Kobayashi Yasuyuki,
Gotoh Keiko
Publication year - 2016
Publication title -
journal of surfactants and detergents
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.349
H-Index - 48
eISSN - 1558-9293
pISSN - 1097-3958
DOI - 10.1007/s11743-016-1794-y
Subject(s) - stearic acid , quartz crystal microbalance , chemistry , aqueous solution , pulmonary surfactant , substrate (aquarium) , chemical engineering , inorganic chemistry , analytical chemistry (journal) , chromatography , adsorption , organic chemistry , biochemistry , oceanography , engineering , geology
A quartz crystal microbalance (QCM) was used to study the removal of stearic acid from poly(ethylene terephthalate) (PET) substrate in aqueous alkali and surfactant solutions. The PET substrate was prepared on a QCM gold electrode by spin‐coating; its properties were examined by scanning electron microscopy, X‐ray photoelectron spectroscopy, and water contact angle measurements. As a result, the QCM electrode was found to be completely covered with a smooth PET film. To investigate the effect of soil deposition state on its removal, stearic acid (an oily soil model) was deposited onto the PET substrate with the Langmuir–Blodgett (LB) technique or by spraying. The QCM frequency was recorded during the removal of stearic acid from the PET substrate in aqueous solutions. In NaOH solution, stearic acid deposited by the LB method was more rapidly removed than when deposited by the spraying method. However, the LB films of stearic acid were difficult to be removed in surfactant solutions. With respect to removal behavior of spray‐deposited stearic acid in surfactant solutions, the results determined by the QCM method were compared with those from microscopic image analysis. The removal efficiencies in the sodium dodecyl sulfate solution were in good agreement between the two methods. However, in the alkyl ethoxylate solution, the removal efficiencies obtained by the QCM method were larger than those from microscopic image analysis. These experimental results were explained by the removal mechanism of stearic acid by the alkali and surfactant solutions.