Premium
Some additional notes on the kinetics and theory of fatty oil hydrogenation
Author(s) -
Bailey A. E.
Publication year - 1949
Publication title -
journal of the american oil chemists' society
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.512
H-Index - 117
eISSN - 1558-9331
pISSN - 0003-021X
DOI - 10.1007/bf02651503
Subject(s) - oleic acid , linoleic acid , catalysis , chemistry , linseed oil , soybean oil , organic chemistry , hydrogen , linolenic acid , adsorption , fatty acid , food science , biochemistry
SummaryEquations are given for estimating from the composition of oil samples the relative reaction rates of the different unsaturated fatty acids in an oil subjected to catalytic hydrogenation. Application of the equations to data from the hydrogenation of cottonseed oil reveals that the ratio of reaction rates, linoleic acid to oleic acid, varies from about 4 to 1 in very non‐selective to about 50 to 1 in very selective hydrogenation. Re‐examination of analytical data on two series of linseed oils hydrogenated selectively and non‐selectively showed the following relative reaction rates for oleic, isolinoleic (9: 10, 15: 16 octadecadienoic), linoleic, and linolenic acids, respectively: non‐selective, 1, 2.5, 7.5, 12.5; selective, 1, 3.85, 31, 77. In the non‐selective hydrogenation of the oil, 24% of the linolenic acid reacting went to linoleic acid, 65% to isolinoleic acid, and 11% directly to oleic acid. In the selective reaction the corresponding figures were none to linoleic acid, 54% to isolinoleic acid, and 46% to oleic acid. The behavior of soybean oil hydrogenated selectively was quite similar to that of linseed oil. The results are discussed in relation to the theory of catalytic hydrogenation. They indicate that the solution of hydrogen in the oil and the adsorption of unsaturated oil on the catalyst are the two steps which are controlling with respect to the reaction rate. It is suggested that the hydrogen pressure, the degree of hydrogen dispersion through the oil, the catalyst concentration, and the temperature all affect the selectivity of the reaction through their influence on the concentration of hydrogen in the reaction zone, with selectivity being favored by a low concentration.