Premium
Dry extrusion as an aid to mechanical expelling of oil from soybeans
Author(s) -
Nelson A. I.,
Wijeratne W. B.,
Yeh S. W.,
Wei T. M.,
Wei L. S.
Publication year - 1987
Publication title -
journal of the american oil chemists' society
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.512
H-Index - 117
eISSN - 1558-9331
pISSN - 0003-021X
DOI - 10.1007/bf02540794
Subject(s) - extrusion , plastics extrusion , die swell , pulp and paper industry , moisture , residual oil , food science , soybean oil , materials science , environmental science , chemistry , composite material , engineering , organic chemistry
A new concept is described for mechanical extraction of oil from soybeans, using dry extrusion as a pretreatment. It was found that coarsely ground whole soybeans at 10 to 14% moisture could be extrusion cooked so that the extrudate emerges from the die in a semi‐fluid state. The dwell time within the extruder was less than 30 seconds, and the temperature was raised to about 135 C. The semi‐fluid extrudate was immediately pressed in a continuous screw press to obtain high quality oil and press cake. Extrusion prior to expelling greatly increased the throughput of the expeller over the rated capacity. An oil recovery of 70% was obtained in single pass expelling using pilot model expellers. Higher recovery rates can be expected with commercial scale expellers. The high temperature‐short time extrusion cooking process eliminates the prolonged heating and holding of raw material in conventional expelling. Under the experimental conditions, press cake with 50% protein, 6% residual oil and 90% inactivation of trypsin inhibitors was obtained. The low fat cake was easily ground in a hammer mill without the usual problems associated with milling of whole beans. The expelled oil was remarkably stable with an AOM stability of 15 hr, which is comparable to refined deodorized oil according to NSPA specifications. The new procedure offers potential for producing natural soybean oil and food grade low fat soy flour by a relatively low cost operation. It may be adopted as an improvement to existing conventional expelling operations in less developed countries or as a commercial or on‐farm operation for producing value added products from soybeans within the U.S.