On the application of the Jensen wake model using a turbulence‐dependent wake decay coefficient: the Sexbierum case

We present a methodology to process wind turbine wake simulations, which are closely related to the nature of wake observations and the processing of these to generate the so‐called wake cases. The method involves averaging a large number of wake simulations over a range of wind directions and partly accounts for the uncertainty in the wind direction assuming that the same follows a Gaussian distribution. Simulations of the single and double wake measurements at the Sexbierum onshore wind farm are performed using a fast engineering wind farm wake model based on the Jensen wake model, a linearized computational fluid dynamics wake model by Fuga and a nonlinear computational fluid dynamics wake model that solves the Reynolds‐averaged Navier–Stokes equations with a modified k ‐ ε turbulence model. The best agreement between models and measurements is found using the Jensen‐based wake model with the suggested post‐processing. We show that the wake decay coefficient of the Jensen wake model must be decreased from the commonly used onshore value of 0.075 to 0.038, when applied to the Sexbierum cases, as wake decay is related to the height, roughness and atmospheric stability and, thus, to turbulence intensity. Based on surface layer relations and assumptions between turbulence intensity and atmospheric stability, we find that at Sexbierum, the atmosphere was probably close to stable, although the stability was not observed. We support these assumptions using detailed meteorological observations from the Høvsøre site in Denmark, which is topographically similar to the Sexbierum region. © 2015 The Authors. Wind Energy published by John Wiley & Sons Ltd.