Premium
Hot pin welding of thin poly(vinyl chloride) sheet
Author(s) -
Van de Ven James D.,
Erdman Arthur G.
Publication year - 2007
Publication title -
journal of vinyl and additive technology
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.295
H-Index - 35
eISSN - 1548-0585
pISSN - 1083-5601
DOI - 10.1002/vnl.20111
Subject(s) - welding , materials science , dwell time , composite material , laser beam welding , medicine , clinical psychology
This paper develops a method of welding two thin sheets of poly(vinyl chloride) (PVC) with a heated pin, thus allowing construction of a relationship between the weld temperature and weld strength. Constructing a relationship between weld strength and temperature is necessary for modeling many welding processes, including laser transmission welding. An experimental approach to establishing this relationship is required because of the complex melting behavior of PVC. The designed experimental device uses a single heated pin to weld samples by using varying pressure and temperature for one second dwell time. An electro‐mechanical loadframe pulled the welded samples until joint failure occurred, thereby allowing determination of the weld strength. An experiment varying welding pin temperature and joining pressure found the temperature to be a highly significant determiner of weld strength, while the pressure was found to be not significant. A transient numerical heat transfer model was used to calculate the weld interface temperature for each pin temperature. The relationship established in this paper can be used to predict the weld strength from the temperature output from models of alternative welding methods. J. VINYL ADDIT. TECHNOL., 13:110–115, 2007. © 2007 Society of Plastics Engineers.