Fillers to improve passing ability of concrete

Concrete possessing high‐passing ability needs to be flowable and cohesive. Hence, passing ability cannot be improved by solely adding superplasticizer, which increases both flowability and segregation of concrete simultaneously. Decreasing the maximum size of aggregates so that concrete segregates at lower cohesiveness is a possible but undesirable way as it narrows the aggregates' grading and decrease dimensional stability of concrete. With the same maximum size of aggregates, passing ability can be improved by raising the concurrent flowability‐segregation envelope of concrete. In this paper, fly ash and silica fume (cementitious fillers) and limestone (inert filler) were selected to replace cement partially and subsequently the passing ability of concrete was studied. From the results, it was evident that when either type of fillers were used, the passing ability and maximum limits of flowability and segregation achieved simultaneously increase. It is because these fillers are finer than cement that provides better filling effect to increase packing density and excess water leading to better flowability. Concurrently, the cohesiveness of concrete also increases as the content of fine particles increases. These allow concrete to hold the coarse aggregates more firmly when passing through narrow gaps, after which the concrete will keep flowing rapidly.