Premium
Recent advances in tubular joints experiments in Brazil
Author(s) -
Lima Luciano,
Vellasco Pedro,
Silva André,
Rodrigues Monique,
Neves Luis,
Guerrieiro Lucas,
Mendes Flávio
Publication year - 2018
Publication title -
stahlbau
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.268
H-Index - 19
eISSN - 1437-1049
pISSN - 0038-9145
DOI - 10.1002/stab.201810588
Subject(s) - chord (peer to peer) , flange , brace , structural engineering , engineering , joint (building) , materials science , composite material , computer science , distributed computing
Dedicated to Prof. Dr.‐Ing. habil. Joachim Lindner on the occasion of his 80th birthday The aesthetical and structural advantages of tubular structural elements sustained the increase in their use in Brazil in last decades. The joints between tubular members remain a critical issue, with many studies indicating that further research is still needed, particularly for some geometries. In the past, some experiments on the influence of the chord stresses over the brace load capacity were published, but a definitive answer to this design issues was not reached. The first part of this paper presents an experimental evaluation centred on the effect of tension and compression chord stresses over RHS chord to SHS braces T‐joints. The results showed that compressive chord stresses could considerably reduce the joint resistance. In contrast, when tension chord stresses are applied the joint resistance increases but this is still not considered in the design codes. Still considering the tubular joints structural behaviour, there are cases where the ultimate resistance of the tubular joints may be enhanced by using flange plates as reinforcement, instead of replacing the chord or braces with stronger sections. Bearing this scenario in mind, the second part of this paper presents some experimental results of SHS T‐joints reinforced with flange plates to achieve a more economical design. The results showed that the joint resistance could be increased about 88 % using the reinforced plate with the same thickness of the chord profile.