Premium
Erneuerung des Innenkorrosionsschutzes der Triebwasserleitungen im Pumpspeicherkraftwerk Markersbach
Author(s) -
Gelhaar Andreas,
Schneider Andreas,
Lang Ingo
Publication year - 2010
Publication title -
stahlbau
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.268
H-Index - 19
eISSN - 1437-1049
pISSN - 0038-9145
DOI - 10.1002/stab.200901270
Subject(s) - rock blasting , materials science , metallurgy , humanities , physics , art , engineering , geotechnical engineering
Im Pumpspeicherwerk Markersbach der Vattenfall Europe Generation AG wurde 2007 und 2008 der Korrosionsschutz der beiden Triebwasserleitungen (Durchmesser ca. 6 m) und Niederdruck‐ Verteilerrohrleitungen (Durchmesser bis zu 8,7 m) erneuert. Die zu bearbeitende Stahloberfläche betrug ca. 50000 m 2 . Die Korrosionsschutzmaßnahme beinhaltete das Abstrahlen der Altbeschichtung mit Herstellung des Oberflächenvorbereitungsgrades Sa 2 1/2 und den Neuaufbau eines 4‐schichtigen Beschichtungssystems. Durch die objektspezifischen Verhältnisse mit einem Gefälle der ca. 1000 m langen Triebwasserleitung von bis zu 58 % war für die Durchführung der Arbeiten der Einsatz eines speziellen Befahrwagens erforderlich. Die Herstellung von für Korrosionsschutzarbeiten geeigneten klimatischen Bedingungen erfolgte durch das Einleiten von entfeuchteter und erwärmter Luft. Der folgende Beitrag beschreibt die Durchführung der Korrosionsschutzarbeiten sowie deren Qualitätssicherung und geht auf bei der Bauausführung aufgetretene Besonderheiten ein. Refreshment of the inner corrosion protection of the works water pipelines of the hydro storage pump power plant Markersbach. The corrosion protection of the works water pipelines (diameter approx. 6 m) and the low pressure distributor pipeline (diameter up to 8,7 m) of the hydro storage pump power plant Markersbach of Vattenfall Europe Generation AG was modernised in 2007 and 2008. The steel surface to be worked on constituted approx. 50000 m 2 . The corrosion protection measure comprised the blasting of the old coating and the creation of the surface preparation level of Sa 2 1/2 and the rebuilding of a 4‐layer coating system. Due to the object‐specific conditions of approx. 1000 m long works water pipeline with an incline of up to 58 %, the use of a special carriage was necessary for the accomplishment of the works. The creation of suitable climatic conditions for the corrosion protection works was achieved via the intake of dehumidified and pre‐heated air. This article describes the accomplishment of the corrosion protection works as well as their quality assurance and discusses the particularities that occurred during the execution of the construction work.