Premium
The Role of Microstructural Constituents on Strength–Ductility–Local Formability of a Transformation‐Induced‐Plasticity‐Aided Bainitic Steel
Author(s) -
Tang Shuai,
Lan Huifang,
Li Jianping,
Liu Zhenyu,
Wang Guodong
Publication year - 2021
Publication title -
steel research international
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.603
H-Index - 49
eISSN - 1869-344X
pISSN - 1611-3683
DOI - 10.1002/srin.202000474
Subject(s) - materials science , austenite , formability , microstructure , plasticity , elongation , metallurgy , ferrite (magnet) , strain hardening exponent , ductility (earth science) , deformation (meteorology) , composite material , martensite , creep , ultimate tensile strength
The microstructural evolution for varied austenitizing temperature is investigated in a transformation‐induced‐plasticity (TRIP)‐aided bainitic steel. Special attention is given to the effect of microstructural constituents on mechanical properties and local formabilities (stretch flangeability and bendability). With the decreasing of austenitizing temperature, proeutectoid ferrite is formed due to the refinement of prior austenite grain size, which yields the increased amount of large blocky martensite/austenite (M/A) constituents. The existence of ferrite and the TRIP effect provided by blocky retained austenite contributes to the higher strain hardening rate in the early stage of deformation as well as the more gradual decreasing of the strain hardening rate, leading to higher uniform elongation (UEL) for decreased austenitizing temperature. Whereas, the post uniform elongation (PEL) shows the opposite trend. Both hole expansion ratio (HER) and bending ratio (BR) have a linear relationship with PEL as well as yield ratio (YR). Replacing the multiphase microstructure with uniform bainitic microstructure would increase the balance of strength and local formability, in which the role of PEL is consistent with YR.