Premium
Briquetting of Fine‐Grained Residues from Iron and Steel Production Using Organic and Inorganic Binders
Author(s) -
Lohmeier Laura,
Thaler Christoph,
Harris Christopher,
Wollenberg Ralf,
Schröder Hans-Werner
Publication year - 2020
Publication title -
steel research international
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.603
H-Index - 49
eISSN - 1869-344X
pISSN - 1611-3683
DOI - 10.1002/srin.202000238
Subject(s) - briquette , materials science , raw material , porosity , bentonite , metallurgy , carbon fibers , pellets , cellulose , iron oxide , waste management , chemical engineering , composite material , coal , chemistry , organic chemistry , composite number , engineering
The Midrex process produces metallurgical residues in the form of dust, sludge, and fines. As these have high iron content, herein, the aim is to recycle the residues and use them as an educt in the Midrex process, thus closing the material cycle and increasing raw material efficiency. Briquetting of these materials with binder is one possibility to prepare them for the use as an educt in the Midrex process. Experiments are conducted to test the suitability of the organic binders starch and cellulose for briquetting. Furthermore, tests with the inorganic bentonite are included for comparison. Briquettes are generally characterized by high strength. However, compared with iron oxide pellets, they have a low porosity and thus a higher apparent density, and consequently, a worse reducibility. The use of organic binders should improve the reducibility. The iron oxides are in close contact with the C‐carrier of the organic binder so that a solid–solid phase direct reduction can take place. Furthermore, the solid carbon reacts to CO, and thus, increases the presence of reducing gas in the enlarged pores of the briquettes, and should therefore increase the degree of reduction.