Premium
Precipitation and Mechanical Property of V‐Alloyed Steel: Role of Cooling Rate
Author(s) -
Huang Zhang,
Yu Hao,
Song Chenghao,
Li Shuying,
Duan Xiaoni,
Wu Weijia
Publication year - 2020
Publication title -
steel research international
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.603
H-Index - 49
eISSN - 1869-344X
pISSN - 1611-3683
DOI - 10.1002/srin.201900444
Subject(s) - materials science , nanoindentation , precipitation , ultimate tensile strength , ferrite (magnet) , transmission electron microscopy , yield (engineering) , interphase , metallurgy , composite material , nanoscopic scale , nanotechnology , physics , biology , meteorology , genetics
Herein, the effect of cooling rate on the precipitation behavior and mechanical properties of V‐added microalloyed steel is systematically investigated by nanoindentation test, X‐ray diffraction, and transmission electron microscopy. The present observation reveals that random precipitates and interphase precipitates are simultaneously observed at the low cooling rate of 0.5 °C s −1 , whereas only random precipitates are obtained at the high cooling rate of 2 °C s −1 . The contribution of the nanoscale precipitates to yield strength is evaluated to be 199 MPa at the low cooling rate of 0.5 °C s −1 , which is almost 4 times higher than that of 2 °C s −1 . The predicted yield strength by semiempirical model based on the structural parameters is consistent with the result from tensile testing. In addition, the greater difference between upper and lower yield points in sample B is caused by dislocations motion, which is related to the smaller interparticle spacing of nanosized precipitates within ferrite matrix.