Premium
Stress‐Temperature‐Transformation and Deformation‐Temperature‐Transformation Diagrams for an Austenitic CrMnNi as‐cast Steel
Author(s) -
Kovalev A.,
Jahn A.,
Weiß A.,
Wolf S.,
Scheller P. R.
Publication year - 2011
Publication title -
steel research international
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.603
H-Index - 49
eISSN - 1869-344X
pISSN - 1611-3683
DOI - 10.1002/srin.201100065
Subject(s) - materials science , austenite , twip , crystal twinning , plasticity , deformation (meteorology) , metallurgy , martensite , microstructure , diffusionless transformation , stress (linguistics) , composite material , linguistics , philosophy
Stress‐Temperature‐Transformation (STT) and Deformation‐Temperature‐Transformation (DTT) diagrams are well‐suited to characterize the TRIP (transformation‐induced plasticity) and TWIP (twinning‐induced plasticity) effect in steels. The triggering stresses for the deformation‐induced microstructure transformation processes, the characteristic temperatures, the yield stress and the strength of the steel are plotted in the STT diagram as functions of temperature. The elongation values of the austenite, the strain‐induced twins and martensite formations are shown in the DTT diagram. The microstructure evolution of a novel austenitic Cr‐Mn‐Ni (16%Cr, 6% Mn, 6% Ni) as‐cast steel during deformation was investigated at various temperatures using static tensile tests, optical microscopy and the magnetic scale for the detection of ferromagnetic phase fraction. At the temperatures above 250 °C the steel only deforms by glide deformation of the austenite. Strain‐induced twinning replaces the glide deformation at temperatures below 250 °C with increasing strain. Below 100 °C, the strain‐induced martensite formation becomes more pronounced. The kinetics of the α'‐martensite formation is described according to stress and deformation temperatures. The STT and DTT diagrams, enhanced with the kinetics of the martensite formation, are presented in this paper.