Premium
Mass Exchange at the Metal‐Mould Flux Interface
Author(s) -
Scheller P.R.
Publication year - 2010
Publication title -
steel research international
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.603
H-Index - 49
eISSN - 1869-344X
pISSN - 1611-3683
DOI - 10.1002/srin.201000185
Subject(s) - slag (welding) , materials science , mass transfer , metallurgy , continuous casting , metal , flux (metallurgy) , composite material , chemistry , chromatography
Mass exchange between liquid steel and the mould flux leads to the oxidation of some elements in the steel and the reduction of slag components. In the continuous casting process, where metal initially solidifies at the metal‐slag interface, reaction products generated there can be cached by the growing solidification front. The disruptions of the interface promote the entrapment of flux particles additionally. They can cause surface defects with quality damages of the cast products as a consequence. These investigations are focused on the contact area between liquid mould flux and metal. The samples were taken from the mould during the continuous casting process. The results show that layers up to approximately 300 nm from the slag/metal interface represent a specific reaction space. The transport of oxygen near the interface and the charge transfer is explained on the basis of the ionic character of the slag. Sodium in this layer on the slag side plays a special role in the oxygen transport besides of the iron ions. The mass transfer rate of oxygen crossing the interface is calculated from measured data and conclusions concerning the stability of the interfacial tension are made.