Premium
Interfacial Reaction between Refractory Materials and Metallurgical Slags containing Fluoride
Author(s) -
Park J.H.,
Suk M.O.,
Jung I.H.,
Guo M.,
Blanpain B.
Publication year - 2010
Publication title -
steel research international
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.603
H-Index - 49
eISSN - 1869-344X
pISSN - 1611-3683
DOI - 10.1002/srin.201000157
Subject(s) - materials science , metallurgy , slag (welding) , corrosion , dissolution , cubic zirconia , electron microprobe , lime , magnesium , ceramic , chemical engineering , engineering
Interfacial reaction between refractory materials such as zirconia, magnesia and doloma brick, and the metallurgical slags of the CaO‐SiO 2 ‐MgO‐CaF 2 system with varying CaF 2 content were investigated at high temperatures using various methodologies with static and dynamic modes. To figure out the corrosion mechanism due to interfacial reaction with the slag, the slag characteristics were examined in terms of flow temperature and viscosity and the corroded interface of zirconia, magnesia and doloma refractories were analyzed by SEM‐EDS and EPMA. With an addition of CaF 2 , three different layers were formed at the interface between slag and zirconia refractory. Furthermore, the corrosion of zirconia refractory was found to be accelerated with an increase of CaF 2 which facilitated the dissolution of intermediate compounds. The penetration of slag through the grain boundaries of MgO refractory is enhanced by increasing the content of CaF 2 due to an increase in the fluidity of slag in the dynamic mode. On the other hand, in the static condition, a dense Ca 2 SiO 4 layer is formed at the hot face of magnesia‐doloma refractory due to a reaction between silica in slag and lime in doloma, resulting in the protection of direct corrosion of refractory brick. However, the thickness of C 2 S layer decreases with increasing content of CaF 2 due to an increase in fluidity of slag.