Premium
Hard amorphous silicon carbonitride coatings produced by plasma enhanced chemical vapour deposition
Author(s) -
Marx Günter,
Körner KayUwe,
Heger Percy
Publication year - 2001
Publication title -
steel research
Language(s) - English
Resource type - Journals
eISSN - 1869-344X
pISSN - 0177-4832
DOI - 10.1002/srin.200100161
Subject(s) - amorphous solid , electron microprobe , analytical chemistry (journal) , fourier transform infrared spectroscopy , hydrogen , chemical vapor deposition , argon , silicon , materials science , plasma enhanced chemical vapor deposition , amorphous carbon , microanalysis , carbon fibers , amorphous silicon , deposition (geology) , chemical engineering , chemistry , metallurgy , crystalline silicon , composite material , composite number , nanotechnology , crystallography , organic chemistry , paleontology , sediment , engineering , biology
Hard amorphous silicon carbonitride coatings for wear resistance have been produced by d.c. plasma‐enhanced chemical vapour deposition on pure iron at 573 K. Compared with most plasma assisted processes work was conducted under a relatively high pressure of 130 Pa. The advantages of this technique are an amorphous film structure, high deposition rates (up to 2 μm/min), high hardness and simple equipment. Hexamethyldisilazan (HMDSN) was used as precursor and argon, hydrogen, nitrogen and ammonia as process gases. The dependence of the coatings on the process parameters (process gas and d.c. power) was investigated. The characterization of the samples was carried out mainly by Fourier transform infrared spectrometry (FTIR), electron probe microanalysis (EPMA) and hardness measurement. Samples show clearly the infrared spectra absorption bands characteristic of SiC and Si 3 N 4 , with traces of hydrogen bonding. The material structure shows a strong dependence on the process gas and the d.c. power. However, for argon and hydrogen were deposited carbon‐rich SiC films with low nitrogen content. Nitridic films with low carbon content were deposited using nitrogen and especially ammonia. The hardness of the produced coatings was about 10 ‐ 55 GPa.