Premium
The effect of carbon content on the rate of reduction of FeO in slag relevant to iron smelting
Author(s) -
Smith Richard H.,
Fruehan Richard J.
Publication year - 1999
Publication title -
steel research
Language(s) - English
Resource type - Journals
eISSN - 1869-344X
pISSN - 0177-4832
DOI - 10.1002/srin.199905643
Subject(s) - slag (welding) , smelting , carbon fibers , sulfur , chemistry , metallurgy , steelmaking , flue gas desulfurization , metal , blast furnace , materials science , composite number , composite material , organic chemistry
In the iron smelting, or bath smelting, process the tapped metal contains high amounts of sulfur and the slag contains high amounts of FeO, relative to blast furnace slag. After tapping, the FeO can be further reduced by carbon in the metal, which will also lead to better desulfurization. Although there have been many studies of the reaction of carbon in iron with FeO in slag, discrepancies exist with regards to the effect of carbon in iron on the rate of FeO reduction in slag, which is the subject of this study. Experiments were conducted at 1723 K, using a slag with basicity close to one with an FeO mass content of 5 %. The rate of reduction was measured using a pressure increase technique. For moderate and high sulfur contents, as in the case of iron smelting, the rate is primarily controlled by the dissociation of CO 2 on the surface of the molten iron. Furthermore, if the effect of carbon on sulfur is taken into account, for the range of carbon mass contents of 2 to 4.5 %, there is no effect of the carbon level on the rate of FeO reduction. At low sulfur contents it was found that there is considerable slag foaming, which inhibits mass transfer of FeO in the slag, and significantly reduces the rate. Even when there is no slag foaming at low sulfur contents, mass transfer of FeO in the slag can influence the rate of FeO reduction.