Premium
Mechanisms of dust generation in a stainless steelmaking converter
Author(s) -
Delhaes Carsten,
Hauck Alejandro,
Neuschütz Dieter
Publication year - 1993
Publication title -
steel research
Language(s) - English
Resource type - Journals
eISSN - 1869-344X
pISSN - 0177-4832
DOI - 10.1002/srin.199300977
Subject(s) - steelmaking , entrainment (biomusicology) , slag (welding) , metallurgy , basic oxygen steelmaking , tuyere , nozzle , materials science , chemistry , thermodynamics , blast furnace , physics , rhythm , acoustics
The four possible mechanisms of dust formation in converter steelmaking are evaporation of metal, ejection of slag, ejection of metal and entrainment of solids. In order to describe the relation between process operation and dust formation and take appropriate measures to minimize the quantity of dust, more detailed information is needed on the amounts contributed by the different dust generation mechanisms. For their determination, dust samples were taken from the off‐gas during refining of five austenitic heats in a modified 80‐t AOD converter. On the basis of dust, metal and slag analyses and process and product gas flow rates, the contributions of the different dust generation mechanisms were quantitatively determined for blowing step I (pure oxygen blowing) and reduction step R (pure argon blowing). The predominant mechanism is ejection of metal and slag droplets by bursting of bubbles at the bath surface. Dust formation via the vapour phase in AOD steelmaking is of less importance than previously expected, the relative amount is only about 3 %. During the addition of fluxes through the converter mouth, the entrainment of solids plays a role, too.