Premium
Effect of heat input and preheating on hydrogen assisted weld joint cracking of a 0.13% C, 1.5% Mn, 0.032% Nb high strength steel of 50 mm plate thickness in the IRC test
Author(s) -
Hoffmeister Hans,
Christensen † Nils,
Akselsen Odd M.
Publication year - 1987
Publication title -
steel research
Language(s) - English
Resource type - Journals
eISSN - 1869-344X
pISSN - 0177-4832
DOI - 10.1002/srin.198700072
Subject(s) - cracking , materials science , welding , joint (building) , metallurgy , hydrogen , yield (engineering) , composite material , intensity (physics) , structural engineering , chemistry , physics , quantum mechanics , organic chemistry , engineering
The effects of preheating and heat input on hydrogen assisted weld joint cracking are investigated at a restraint intensity of 32 kN mm −2 of a 0.13% C, 1.5% Mn, 0.032% Nb high strength steel of 50 mm thickness in the IRC test, using a high hydrogen experimental electrode of 530 N mm −2 yield strength. For a heat input ranging from 0.6 to 1.05 kJ mm −1 a critical preheating temperature of 140°C for almost complete crack prevention, for a range from 1.5 to 2.05 kJ mm −1 , 120°C were found respectively. Nominal stresses at the ends of the 70‐80 mm long welds at the start of extensive cracking increase with heat input and preheat, the crack propagating from the HAZ into the weld metal quickly. Under conditions without or close to cracking, however, final stresses after 18 h are reduced with heat inputs. Consequently, crack critical combinations of preheating and heat input are linked to stresses decreasing with heat input but increasing with preheat. From the established IRC‐test diagram required combinations of local preheat and heat input for either avoiding hydrogen cracking or overstressing of the weld metal can be determined. Currently used cracking prediction procedures do not consider the effect of heat input and preheat on stress sufficiently and, therefore, may provide unsafe conclusions.