Premium
Silicon ion bombardment of Sb/Si contacts
Author(s) -
Malherbe J. B.,
Friedland E.,
Bredell L. J.,
Fletcher M.,
Weimer K. P.
Publication year - 1992
Publication title -
surface and interface analysis
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.52
H-Index - 90
eISSN - 1096-9918
pISSN - 0142-2421
DOI - 10.1002/sia.740190164
Subject(s) - saturation current , channelling , saturation (graph theory) , ion implantation , silicon , equivalent series resistance , schottky diode , silicide , analytical chemistry (journal) , ion , materials science , schottky barrier , chemistry , substrate (aquarium) , optoelectronics , physics , mathematics , organic chemistry , oceanography , chromatography , quantum mechanics , voltage , combinatorics , diode , geology
Si + bombardment of Sb/n‐Si Schottky contacts significantly affects the values of some Schottky parameters even at low does densities. The parameters considered are the ideality constant n , the saturation current density I s and the series resistance R . Before implantation these parameters exhibited large variations due to interface conditions. After implantation more uniform I – V characteristics were observed. Implantation led to higher values for the ideality constant and the series resistance and lower values for the saturation current. The ideality factor showed a decrease with increasing implantation dose. The saturation current and series resistance did not show any dose dependence. The compositional/structural properties of the contacts after ion bombardment are altered at high dose densities. For dose densities ϕ ≥ 5 × 10 14 Si + cm −2 , α‐particle channelling showed the silicon substrate to be partly amorphized. This amorphization increased with increasing dose densities. AES and RBS measurements found no evidence of silicide formation. Only slight mixing was observed. Other experimental and theoretical studies either confirm our measurements or confirm the trend of our measurements.