Premium
Surface characteristics of AZ91D alloy anodized with various conditions
Author(s) -
Park Il Song,
Jang Yong Seok,
Kim Yu Kyoung,
Lee Min Ho,
Yoon Jeong Mo,
Bae Tae Sung
Publication year - 2008
Publication title -
surface and interface analysis
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.52
H-Index - 90
eISSN - 1096-9918
pISSN - 0142-2421
DOI - 10.1002/sia.2876
Subject(s) - corrosion , electrolyte , materials science , sodium silicate , anodizing , alloy , polarization (electrochemistry) , magnesium alloy , oxide , surface roughness , silicate , chemical engineering , metallurgy , chemistry , composite material , aluminium , electrode , engineering
Anodic oxidation of an AZ91D magnesium alloy was carried out in an attempt to increase the corrosion resistance. The alloy was placed in an electrolyte containing 0.1 M sodium silicate (Na 2 SiO 3 ), 2.0 M sodium hydroxide (NaOH) and 0.1 M sodium phosphate (Na 3 PO 4 ), and treated with a current density of 100–400 mA/cm 2 for 1 to 4 min. After the anodic oxidation treatment, the surface characteristics were analyzed by SEM, X‐ray diffraction (XRD) and a surface roughness tester. The corrosion resistance was determined by measuring the corrosion potential and corrosion current density using potentiodynamic polarization in a 3.5 wt% NaCl electrolyte solution. Although the anodic oxidation treatment with the base electrolyte resulted in an arrival voltage ranging from 60 to 70 V, the addition of silicate tended to reduce this arrival voltage by approximately 10–20 V and decrease the critical voltage required for the formation of a porous oxide film. The pore size and film thickness increased with increasing applied current and treatment time. The addition of silicate to the electrolyte resulted in films with a homogeneous pore size and a film thickness increasing with the increasing applied current and treatment time. XRD showed the formation of a new MgO and Mg 2 SiO 4 phase. The formation of Mg 2 SiO 4 was attributed to the presence of SiO 4 4− in the film. After the addition of silicate, the corrosion potential increased and corrosion current decreased, resulting in improved corrosion resistance. Copyright © 2008 John Wiley & Sons, Ltd.