Premium
Surface characteristics of titanium–silver alloys in artificial saliva
Author(s) -
Shim H. M.,
Oh K. T.,
Woo J. Y.,
Hwang C. J.,
Kim K. N.
Publication year - 2006
Publication title -
surface and interface analysis
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.52
H-Index - 90
eISSN - 1096-9918
pISSN - 0142-2421
DOI - 10.1002/sia.2175
Subject(s) - titanium , materials science , corrosion , metallurgy , titanium oxide , titanium alloy , oxide , biocompatibility , x ray photoelectron spectroscopy , chemical engineering , alloy , engineering
Abstract Titanium and its alloys are widely used in biomedical and dental fields because of their excellent corrosion resistance and biocompatibility. It is well known that titanium is protected from corrosion because of the stability of the passive film that controls and determines the corrosion resistance and biocompatibility of titanium and its alloys. The purpose of this study was to evaluate the electrochemical properties of titanium–silver alloys and the surface characteristics of passive film in artificial saliva. We designed titanium–silver alloys with silver contents ranging from 0 to 5 at.%, in 1% increments. These alloys were arc‐melted, homogenized, hot‐rolled to 2 mm thickness, and finally solution heat‐treated for 1 h and quenched. Potentiostatic testing was performed, and the open circuit potentials of the alloys were measured in artificial saliva, at 37 °C. The passive films of the titanium–silver alloys were analyzed via XPS. Titanium–silver alloys maintained low current density and showed stable passive region and also had high open circuit potential as compared with pure titanium. The open circuit potential of titanium–silver alloys increased as silver addition increased. With regard to the fraction of oxygen species, a component of over 80% was found to be comprised of oxide. Therefore, the titanium surface mainly consisted of titanium oxide and, on the titanium–silver alloys, this film was composed of TiO 2 , Ti 2 O 3 , and TiO. As silver content increased, the TiO 2 fraction also increased, as did the thickness of the titanium oxide layer formed. Copyright © 2005 John Wiley & Sons, Ltd.