Premium
The Use of Oxygen Release Compound for the Accelerated Bioremediation of Aerobically Degradable Contaminants: The Advent of Time‐Release Electron Acceptors
Author(s) -
Koenigsberg Stephen S.,
Sandefur Craig A.
Publication year - 1999
Publication title -
remediation journal
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.762
H-Index - 27
eISSN - 1520-6831
pISSN - 1051-5658
DOI - 10.1002/rem.3440100103
Subject(s) - oxygenate , btex , chemistry , ethylbenzene , gasoline , xylene , hydrocarbon , oxygen , environmental chemistry , waste management , benzene , chemical engineering , organic chemistry , catalysis , engineering
Abstract Oxygen Release Compound (ORC®) is a patented formulation of intercalated magnesium peroxide that releases oxygen slowly when hydrated. ORC treatment represents a “low intensity” approach to site remediation. It provides a simple, passive, low‐cost and long‐term acceleration of aerobic natural attenuation and has been shown to cost‐effectively reduce time to site closure. ORC is now a proven technology as evidenced by its five years of use on over 5,000 sites in 50 states and 11 countries, and the existence of a full body of independent, peer reviewed literature on its performance. The first applications of ORC were for the treatment of benzene, toulene, ethylbenzene, and xylene (BTEX) and other light petroleum hydrocarbon fractions. Use has now expanded to the treatment of heavier fractions such as heating oil and some of the Polycyclic aromatic hydrocarbons (PAHs). More recently. ORC has been used to bioremediate the highly mobile and problematic gasoline oxygenate methyl tertiary butyl ether (MTBE) and has been applied to sites impacted with nitroaromatics, chloroaromatics, and some of the lower‐order chlorinated hydrocarbons that can be treated aerobically—most notably vinyl chloride. Since ORC is an insoluble powder, it can be packaged in material composed of a specially designed filter fabric. These “filter socks” are then contacted with contaminated groundwater via an array of wells or trenches. ORC can also be mixed directly with water to form a slurry for permanent injection applications in the saturated zone or dispersed in powdered form for the in‐situ or ex‐situ treatment of soil. A broad array of treatment points, in which ORC slurry is backfilled or injected, can be implemented with low‐cost, small‐bore push‐point technologies to directly treat dissolved phase plumes and moderate levels of sorbed contaminants. Powder or slurry is traditionally used in the remediation of residual contamination at the bottom of contaminated soil excavations. © 1999 John Wiley & Sons, Inc.