z-logo
Premium
Investigations Concerning the Maximum Filling Degree of Dangerous Goods Packagings for Hazardous Liquids
Author(s) -
SchlickHasper Eva,
Goedecke Thomas,
Kraume Matthias
Publication year - 2017
Publication title -
packaging technology and science
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.365
H-Index - 50
eISSN - 1099-1522
pISSN - 0894-3214
DOI - 10.1002/pts.2209
Subject(s) - degree (music) , gauge (firearms) , volume (thermodynamics) , materials science , mechanics , thermodynamics , physics , metallurgy , acoustics
The dangerous goods regulations UN/ADR 6.1.5.5.4 (a) prescribe a maximum filling degree for determining the test pressure for the hydraulic pressure test by real measurements. The assumption is that the maximum filling degree of the liquid phase is the worst case concerning the gauge pressure. Therefore, the main objective of this study is to investigate the effect of the filling degree on the gauge pressure. Gauge pressure measurements and calculations for different substances were carried out at different filling degrees for a steel drum and a steel jerrican (heating up from 15°C to 55°C). The assumption that the maximum filling degree is the most critical is only valid for relatively rigid packagings: If the relative expansion of the packaging is smaller than the volume increase of the liquid phase due to heating up, the gauge pressure increases with increasing filling degree. But the opposite is true for relatively flexible packagings: If the relative expansion of the packaging exceeds the relative volume expansion of the liquid, the gauge pressure increases for decreasing filling degrees. The current regulations for the hydraulic test pressure determination at a maximum filing degree do not lead to the intended safety level. For a lower level than the maximum filling degree, the prescribed safety factor of 1.5 is not respected. Under transport conditions, it is possible that the inner gauge pressure exceeds the test pressure. This can result in a failure of the packaging. There is a need to reconsider the regulations. Copyright © 2016 John Wiley & Sons, Ltd.

This content is not available in your region!

Continue researching here.

Having issues? You can contact us here