Premium
Light‐induced degradation and regeneration of multicrystalline silicon Al‐BSF and PERC solar cells
Author(s) -
Padmanabhan Mrinalini,
Jhaveri Krutarth,
Sharma Romika,
Basu Prabir Kanti,
Raj Samuel,
Wong Johnson,
Li Joel
Publication year - 2016
Publication title -
physica status solidi (rrl) – rapid research letters
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.786
H-Index - 68
eISSN - 1862-6270
pISSN - 1862-6254
DOI - 10.1002/pssr.201600173
Subject(s) - monocrystalline silicon , wafer , materials science , carrier lifetime , solar cell , silicon , aluminium , passivation , degradation (telecommunications) , common emitter , crystalline silicon , optoelectronics , nanotechnology , composite material , electronic engineering , layer (electronics) , engineering
Light‐induced degradation (LID) is a well‐known problem faced by p‐type Czochralski (Cz) monocrystalline silicon (mono‐Si) wafer solar cells. In mono‐Si material, the physical mechanism has been traced to the formation of recombination active boron‐oxygen (B–O) complexes, which can be permanently deactivated through a regeneration process. In recent years, LID has also been identified to be a significant problem for multicrystalline silicon (multi‐Si) wafer solar cells, but the exact physical mechanism is still unknown. In this work, we study the effect of LID in two different solar cell structures, aluminium back‐surface‐field (Al‐BSF) and aluminium local back‐surface‐field (Al‐LBSF or PERC (passivated emitter and rear cell)) multi‐Si solar cells. The large‐area (156 mm × 156 mm) multi‐Si solar cells are light soaked under constant 1‐sun illumination at elevated temperatures of 90 °C. Our study shows that, in general, PERC multi‐Si solar cells degrade faster and to a greater extent than Al‐BSF multi‐Si solar cells. The total degradation and regeneration can occur within ∼320 hours for PERC cells and within ∼200 hours for Al‐BSF cells, which is much faster than the timescales previously reported for PERC cells. An important finding of this work is that Al‐BSF solar cells can also achieve almost complete regeneration, which has not been reported before. The maximum degradation in Al‐BSF cells is shown to reduce from 2% (relative) to an average of 1.5% (relative) with heavier phosphorus diffusion.