Premium
Wettability Control on YW2 Cemented Carbide Surface by Femtosecond Laser Irradiation
Author(s) -
Yang Qibiao,
Zhou Wei,
Wang Li,
Ren Xiaoping,
Wang Yutao,
Lou Deyuan,
Chen Lie,
Cheng Jian,
Zheng Zhong,
Liu Dun
Publication year - 2021
Publication title -
physica status solidi (a)
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.532
H-Index - 104
eISSN - 1862-6319
pISSN - 1862-6300
DOI - 10.1002/pssa.202000709
Subject(s) - contact angle , materials science , wetting , scanning electron microscope , cemented carbide , surface roughness , superhydrophilicity , composite material , femtosecond , surface finish , optics , laser , carbide , physics
The surface wettability control of cemented carbide tools is beneficial to the improvement of tool life and surface quality of workpieces in wet cutting. To clarify the correlation between the surface topography and wettability, squared microdimples are fabricated on the cemented carbide surface using a femtosecond laser. The dependencies of the side length, the depth, and the distribution density of squared microdimples on the surface topography and contact angle are studied. As the average laser power, and the number of scanning passes, increase, both the side length and depth of the squared microdimples increase. The contact angle decreases from hydrophilic to superhydrophilic. Moreover, the roughness height parameters have a great influence on the surface wettability, the larger the surface arithmetic average height, the smaller the kurtosis, the larger the skewness, and the better the hydrophilicity. The results of the scanning electron microscope (SEM) and energy‐dispersive spectrometer (EDS) reflect that the changes in the micro–nano protrusions, carbon, and oxygen elements cause deviation between the calculated contact angle and the actual contact angle. The friction coefficient of textured tools is lower than that of untextured tools at high sliding speed. Reasonable design of surface texture accurately controls surface wettability.