Premium
Diamond Microstructuring by Deep Anisotropic Reactive Ion Etching
Author(s) -
Golovanov Anton V.,
Bormashov Vitaly S.,
Luparev Nikolay V.,
Tarelkin Sergey A.,
Troschiev Sergey Y.,
Buga Sergei G.,
Blank Vladimir D.
Publication year - 2018
Publication title -
physica status solidi (a)
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.532
H-Index - 104
eISSN - 1862-6319
pISSN - 1862-6300
DOI - 10.1002/pssa.201800273
Subject(s) - diamond , reactive ion etching , sputtering , materials science , fabrication , etching (microfabrication) , plasma etching , isotropic etching , nanotechnology , optoelectronics , composite material , thin film , layer (electronics) , medicine , alternative medicine , pathology
Fabrication of diamond micro‐patterned structures is a technological challenge due to the outstanding hardness and chemical stability of the material. In this work, the synthetic diamond reactive ion etching (RIE) process is studied. The effects of the gas mixture and bias on the diamond etching rate are investigated. A high etching rate (up to 5 μm h −1 ) is achieved in SF 6 based plasmas with the intensive ion sputtering. The features of protective masks on diamond samples fabrication are discussed. Etching selectivities of Al, Ni, Mo, Al 2 O 3 , and AlN as mask materials in SF 6 plasma are investigated. The initial size of the mask affects its selectivity. To explain the influence of the initial mask shape on the selectivity, a semi‐empirical model of the diamond‐mask topography transformation under the ion sputtering is proposed. By setting the shape of the masks, it is possible to form diamond structures with any desirable profile using the same etching process: steep walls with 20 μm height, solid immersion lenses with 2–10 μm radii, conic figures, and developed surface. This is a relatively simple and universal method of diamond microstructures fabrication.