Premium
Influence of sintering temperature on microstructures and energy‐storage properties of barium strontium titanate glass‐ceramics prepared by sol–gel process
Author(s) -
Zhu Jia,
Zhang Yong,
Song Xiaozhen,
Zhang Qian,
Yang Dongliang,
Chen Yongzhou
Publication year - 2015
Publication title -
physica status solidi (a)
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.532
H-Index - 104
eISSN - 1862-6319
pISSN - 1862-6300
DOI - 10.1002/pssa.201532199
Subject(s) - materials science , sintering , dielectric , microstructure , barium titanate , strontium barium niobate , activation energy , composite material , ceramic , atmospheric temperature range , mineralogy , dielectric loss , analytical chemistry (journal) , ferroelectricity , thermodynamics , optoelectronics , chemistry , physics , organic chemistry , chromatography
The sol–gel processing, microstructures, dielectric properties and energy‐storage properties of barium strontium titanate glass‐ceramics over the sintering temperature range of 1000–1150 °C were studied. Through the X‐ray diffraction result, it is revealed that the crystallinity increases as the sintering temperature increased from 1000 to 1080 °C and has reached a steady‐state regime above 1100 °C. Scanning electron microscopy images showed that with the increase of sintering temperature, the crystal size increased. Dielectric measurements revealed that the increase in the sintering temperature resulted in a significant increase in the dielectric constant, a strong sharpness of the temperature‐dependent dielectric response and a pronounced decrease of the temperature of the dielectric maximum. The correlation between charge spreading behavior and activation energies of crystal and glass was discussed by the employment of the impedance spectroscopy studies. As a result of polarization‐electric field hysteresis loops, both the charged and discharged densities increased with increasing sintering temperature. And the maximum value of energy storage efficiency was found to occur at 1130 °C. Finally, the dependence of released energy and power densities calculated from the discharged current–time ( I – t ) curves on the sintering temperature was studied. The relationship between the energy storage properties and microstructure was correlated. Polarization–electric field hysteresis loops for the BST glass‐ceramics sintered at different temperatures.