Premium
Comparing different techniques to assess the risk of dust drift from pesticide‐coated seeds
Author(s) -
Foqué Dieter,
Beck Bert,
Devarrewaere Wouter,
Verboven Pieter,
Nuyttens David
Publication year - 2017
Publication title -
pest management science
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 1.296
H-Index - 125
eISSN - 1526-4998
pISSN - 1526-498X
DOI - 10.1002/ps.4557
Subject(s) - sowing , abrasion (mechanical) , environmental science , pesticide , seeding , pesticide application , environmental engineering , statistics , agricultural engineering , mathematics , engineering , agronomy , biology , mechanical engineering
BACKGROUND Although considered as a safe pesticide application method, treated seeds can pose environmental risks when abraded pesticide‐laden seed particles are expelled during sowing. This dust drift risk is clearly linked with seed coating quality. Seed coating quality is traditionally assessed with Heubach dust meters, and guidelines are established in terms of the ‘Heubach value’. This technique may, however, not take all drift‐sensitive particles into account. In this study, results of the Heubach test are compared with two alternative set‐ups: mechanical sieving and the individual sowing element. RESULTS The abrasion potential assessed with the Heubach dust meter was much lower than the total dust fraction generated by mechanical sieving and the individual sowing element. The amount of dust produced and the dust particle size distribution of both the other techniques were comparable. CONCLUSION It looks as if the Heubach dust meter underestimates the risk of dust drift. Using one of the alternative methods might be a more appropriate way to assess the abrasion potential of seeds. Given the low investment cost required, mechanical sieving seems to be a good approach for non‐specialised labs. The individual sowing element set‐up is the most realistic simulation of in‐field dust drift generation but requires a higher initial investment. Therefore, this set‐up is most suitable for specialised labs and is recommended for further research in this area. © 2017 Society of Chemical Industry