Microporous membranes obtained from polypropylene blends with superior permeability properties

A blend of two polypropylene resins, different in molecular structure, one with linear chains and the other with long chain branches, was investigated to develop microporous membranes through melt extrusion (cast film process) followed by film stretching. The branched component significantly affected the row‐nucleated lamellar crystalline structure in the precursor films. The arrangement and orientation of the crystalline and amorphous phases were examined by wide angle X‐ray diffraction and Fourier transform infrared spectroscopy methods. It was found that blending of a small amount of a long chain branched polypropylene improved the orientation of the both crystalline and amorphous phases in the precursor films. Annealing, followed by cold and hot stretching were consequently employed to generate and enlarge pores in the films as a result of lamellae separation. SEM micrographs of the surface of the membranes obtained from the blend revealed elongated thin fibrils and a large number of lamellae. The lamellae thickness for the blend was much shorter in comparison to that of the linear PP precursor film. The permeability of the samples to water vapor and N 2 was significantly enhanced (more than twice) for the blend system. The porosity of the blend membrane showed a significant improvement with a value of 53% compared to 41% for the linear PP membrane. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 148–157, 2008